Hard Drive Inspector 3.97 Build 434 Pro

Hard Drive Inspector is an easy-to-use program that monitors computer disks’ health to prevent crashes and expensive hard disk recovery. The value of information stored on an average computer hard drive often exceeds the value of the computer itself. But a hard drive is one of the most unreliable internal computer devices. When it crashes (which happens quite frequently), the stored information will be lost fully or partially. Subsequent hard drive recovery is either not possible at all, or constitutes a very sophisticated and expensive procedure that can be performed only by specialists.

Modern hard drives support S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) that was specially developed to detect upcoming disk failures. Using this technology Hard Drive Inspector can monitor the current state of various life-critical parameters describing a disk’s reliability and performance. Hard Drive Inspector analyzes this data and warns the user if the parameters indicate a critical reduction of disk reliability. Timely alerts make it possible to copy the data and replace an unreliable disk, thus preventing information loss and costly hard drive data recovery.

Specific Features of Hard Drive Inspector for Notebooks:

Year by year notebook computers are replacing usual desktop PCs at work and at home. Notebooks are small and handy, but they are also much more fragile than desktops. For a number of reasons notebook hard drives are even less reliable than those of desktops. These reasons are:

1. Shaking. Various jolts and shakings happen frequently during notebook transportation and active work. This expedites deterioration of the mechanical parts of a hard drive.
2. Insufficient power supply. When powered by the battery, the notebook hard drive might not get sufficient power because of excessive battery load. In this case the hard drive will not be able to maintain constant rotation speed which increases the probability of information loss.
3. High temperature. Heat emission of components of modern notebooks may reach 100 watts. And all those components are located in a small area with weak cooling. In such a harsh environment hard drive temperature is often close to or even exceeds the maximum allowed value (55°C (131°F) for most hard drives). This negatively affects both mechanical (thermal expansion of the platters) and electronic (overheating and possible failure of the controller) parts of a hard drive.

That’s why notebook hard drives need constant health monitoring to prevent data loss. Such monitoring can be performed with Hard Drive Inspector Professional (HDIP). But the Professional version is intended mostly for desktop computers and doesn’t take into account some peculiar features of notebooks. For example, HDIP periodically reads S.M.A.R.T. data from a hard drive to control its health. Reading this data when the hard drive is in sleep mode activates the disk which in turn causes an unnecessary increase in power consumption and reduces battery life. In addition, the average working temperature of a notebook’s hard drives is usually higher than the temperature of a desktop’s disks. So, when used in notebooks, HDIP may show false overheating alerts.
These problems led us to develop a special edition of Hard Drive Inspector intended for notebook users. Hard Drive Inspector for Notebooks has all the functionality of the Professional version, but also takes into account the specific features of notebooks listed above. This is the most powerful version of Hard Drive Inspector.
DOWNLOAD